HP Pavilion HDX9000 Maintenance And Service Manual Download Page 21

Page: 21 / 163

Rear components

Rear left-side components

Item

Component

Description

(1)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal for

the internal fan to cycle on and off during routine operation.

(2)

Infrared (IR) emitter jack

Connects the computer to your cable or satellite set-top box.

(3)

TV audio line-in jack

Connects a cable or satellite set-top box to the TV tuner for

high-quality audio.

(4)

S-Video-in jack

Connects a cable or satellite set-top box to the TV tuner for

high-quality video.

(5)

RF coaxial cable jack

Connects a coaxial cable or TV antenna.

NOTE:

The computer is shipped with an RF coaxial cable

adapter. Depending on your computer model, the adapter

may be required for proper setup.

Rear components 13

Summary of Contents for Pavilion HDX9000




































































































































































Search results

Summary of Contents for Pavilion HDX9000

Reviews:

HP Pavilion HDX9000, Maintenance And Service Manual, Page: 21 / 163

Search results

Summary of Contents for Pavilion HDX9000

Reviews: