Top cover
Description
Spare part number
Top cover (includes TouchPad board cable and TouchPad button cable, and LED boards and cables) 448174-001
Before removing the top cover, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery on page 38
).
5
.
Remove the following components:
a
.
Hard drive (see
Hard drive on page 45
)
b
.
Optical drive (see
Optical drive on page 52
)
c
.
Keyboard (see
Keyboard on page 54
)
d
.
Hinge cover (see
Hinge cover on page 56
)
e
.
Rear cover (see
Rear cover on page 57
)
Remove the top cover:
1
.
Turn the computer upside down, with the front toward you.
2
.
Remove the two Mylar screw covers
(1)
in the optical drive bay. These screw covers are available
in the Rubber Feet Kit, spare part number 452320-001.
3
.
Remove the two Phillips PM2.5×4.0 screws
(2)
and the ten Phillips PM2.5×8.0 screws
(3)
that secure
the top cover to the computer.
Component replacement procedures 59
Summary of Contents for Pavilion HDX9000
