Reverse this procedure to install the audio/infrared board.
Bluetooth module
NOTE:
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is available in the Cable Kit, spare part number 448169-001.
Description
Spare part number
Bluetooth module
398393-002
Before removing the Bluetooth module, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery on page 38
).
5
.
Remove the following components:
a
.
Hard drive (see
Hard drive on page 45
)
b
.
Optical drive (see
Optical drive on page 52
)
c
.
Keyboard (see
Keyboard on page 54
)
d
.
Hinge cover (see
Hinge cover on page 56
)
e
.
Rear cover (see
Rear cover on page 57
)
f
.
Top cover (see
Top cover on page 59
)
Remove the Bluetooth module:
1
.
Disconnect the Bluetooth module cable
(1)
from the system board.
2
.
Remove the two silver Phillips PM2.0×4.0 screws
(2)
that secure the Bluetooth module to the
computer.
68 Chapter
4
Removal and replacement procedures
Summary of Contents for Pavilion HDX9000
