manualshive.com logo in svg

HP NonStop SSH 544701-014, Reference Manual

The HP NonStop SSH 544701-014 is a reliable and secure product that provides seamless access to remote servers. To ensure a smooth user experience, we offer a comprehensive Reference Manual for free download on our website. Easily retrieve your copy today from manualshive.com, and explore the full capabilities of this exceptional product.

Share
Download
background image

270  

•

  STN Reference 

HP NonStop SSH Reference Manual  

 

STN09 Window is stopped by system operator 

User entered #WINDOW name in response to the menu, but the specified window was stopped by STNCOM 
STOP/ABORT WINDOW command. 

 

STN10 Connected to SU Window 

User entered #WINDOW name in response to the menu, and the session was successfully connected to the requested 
window. 

 

STN11 Service not found 

User entered a service name in response to the menu, but the specified service is not configured. 

 

STN12 Service is stopped by system operator 

User entered a service name in response to the menu, but the specified service was stopped by STNCOM STOP/ABORT 
SERVICE command. 

 

STN13 No Static Window available for this Service  

User entered a service name in response to the menu, but the specified static service either has no windows configured, 
or all configured windows are in use or STOPPED. 

 

STN14 Connected to Static Window <window> 

User entered a service name in response to the menu, and the session was successfully connected to <window>, which 
was configured for the requested static service. 

 

STN15 The Dynamic Service selected required a userid and password 

STN15 Enter group.user: 

Self-explanatory. Enter a valid username. 

 

STN16 Enter password: 

This prompt follows the response to STN15. 

 

STN17 Input error; proper syntax is group.user 

Improper response to STN15 prompt. 

 

STN18 Unknown userid or incorrect password 

Self-explanatory. 

 

Summary of Contents for NonStop SSH 544701-014

























































































































































































































































































































































Reviews:

No comments

Related manuals for NonStop SSH 544701-014

Amanda Work.Group/Windows 3 User Manual preview
Work.Group/Windows 3
Brand: Amanda Pages: 106
Campbell Baler Instruction Manual preview
Baler
Brand: Campbell Pages: 16
AVG LINKSCANNER User Manual preview
LINKSCANNER
Brand: AVG Pages: 47
Lowrance Elite 5 Operation Manual preview
Elite 5
Brand: Lowrance Pages: 48
Intel 512AN_HMW User Manual preview
512AN_HMW
Brand: Intel Pages: 212
UNIBLUE REGISTRYBOOSTER Quick Start Manual preview
REGISTRYBOOSTER
Brand: UNIBLUE Pages: 3
UNIBLUE POWERSUITE Quick Start Manual preview
POWERSUITE
Brand: UNIBLUE Pages: 4
VERITAS NetBackupTM 5.0 User Manual And Product Specifications preview
NetBackupTM 5.0
Brand: VERITAS Pages: 428
Qlogic OFED+ Host Software User'S Manual preview
OFED+ Host
Brand: Qlogic Pages: 284
TANDBERG MOVI 4.0 - FOR WINDOWS 09-2010 User Manual preview
MOVI 4.0 - FOR WINDOWS 09-2010
Brand: TANDBERG Pages: 19
ACRONIS BACKUP AND RECOVERY 10 - DEDUPLICATION Datasheet preview
BACKUP AND RECOVERY 10 - DEDUPLICATION
Brand: ACRONIS Pages: 2
HP ProBook 5320m - Notebook PC User Manual preview
ProBook 5320m - Notebook PC
Brand: HP Pages: 147
HP PROBOOK 4425S Quickspecs preview
PROBOOK 4425S
Brand: HP Pages: 38
HP ProBook 4325s - Notebook PC Maintenance And Service Manual preview
ProBook 4325s - Notebook PC
Brand: HP Pages: 160
HP ProBook 4525s - Notebook PC User Manual preview
ProBook 4525s - Notebook PC
Brand: HP Pages: 102
HP ProBook 5330m Brochure preview
ProBook 5330m
Brand: HP Pages: 4
HP ProBook 5330m Maintenance And Service Manual preview
ProBook 5330m
Brand: HP Pages: 133
HP ProBook 5330m Specification preview
ProBook 5330m
Brand: HP Pages: 31

Brands by name

Popular brands

Load more brands