manualshive.com logo in svg

HP NonStop SSH 544701-014, Reference Manual

Share
Download
HP NonStop SSH 544701-014 Reference Manual Download Page 339

HP NonStop SSH Reference Manual  

Appendix  

•

  339 

The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse or promote products 
derived from this software without prior written permission. For written permission, please 
contact [email protected] 

 

Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their 
names without prior written permission of the OpenSSL Project. 

 

Redistributions of any form whatsoever must retain the following acknowledgment: "This product 
includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit 
(http://www.openssl.org)" 

 

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY EXPRESSED OR IMPLIED 
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS 
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY 
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This 
product includes cryptographic software written by Eric Young ([email protected]). This product 
includes software written by Tim Hudson ([email protected]). 

 

 SSLeay license  

 

Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved. This package is an 
SSL implementation written by Eric Young ([email protected]). The implementation was written so 
as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as 
long as the following conditions are aheared to. The following conditions apply to all code found 
in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL 
documentation included with this distribution is covered by the same copyright terms except that 
the holder is Tim Hudson ([email protected]). 

 

Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be 
removed. If this package is used in a product, Eric Young should be given attribution as the 
author of the parts of the library used. This can be in the form of a textual message at program 
startup or in documentation (online or textual) provided with the package. Redistribution and use 
in source and binary forms, with or without modification, are permitted provided that the 
following conditions are met: 

Redistributions of source code must retain the copyright notice, this list of conditions and the 
following disclaimer. 

 

Redistributions in binary form must reproduce the above copyright notice, this list of conditions 
and the following disclaimer in the documentation and/or other materials provided with the 
distribution. 

 

All advertising materials mentioning features or use of this software must display the following 
acknowledgement: "This product includes cryptographic software written by Eric Young 
([email protected])". The word 'cryptographic' can be left out if the routines from the library 
being used are not cryptographic related :-). 

 

If you include any Windows specific code (or a derivative thereof) from the apps directory 
(application code) you must include an acknowledgement: "This product includes software written 
by Tim Hudson ([email protected])" 

 

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY 
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 

Summary of Contents for NonStop SSH 544701-014

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands