HP NonStop SSH 544701-014 Reference Manual Download Page 85

Page: 85 / 344

HP NonStop SSH Reference Manual

Configuring and Running SSH2

•

Bit 5 (decimal 16)

Process ID (name or PIN)

Bit 7 (decimal 64)

Log level of message

Default

The default log format is 93 (date, time, milliseconds, process ID, and log level).

Example

Display date, time, and milliseconds only:

LOGFORMATCONSOLE 13

Display date and time only:

LOGFORMATCONSOLE 5

See also:

LOGFORMATFILE, LOGFORMATEMS

LOGFORMATEMS

Use this parameter to control the format of the log messages that are written to EMS.

Parameter Syntax

LOGFORMATEMS

format

Arguments

format

A number is used to represent a bit mask that controls the format. Following are the values and their
corresponding format:

bit 1 (decimal 1)

Date

bit 2 (decimal 2)

Header (log messages a pre-fixed with "[log]")

bit 3 (decimal 4)

Time

bit 4 (decimal 8)

Milliseconds

bit 5 (decimal 16)

Process ID (name or PIN)

bit 7 (decimal 64)

Log level of message

Default

The default log format is 93 (date, time, milliseconds, process ID, and log level).

Example

Display date, time, and milliseconds only:

LOGFORMATEMS 13

Display date and time only:

LOGFORMATEMS 5

See also:

LOGFORMATCONSOLE, LOGFORMATFILE

Summary of Contents for NonStop SSH 544701-014

























































































































































































































































































































































Search results

Summary of Contents for NonStop SSH 544701-014

Reviews:

Related manuals for NonStop SSH 544701-014

Brands by name

Popular brands

HP NonStop SSH 544701-014, Reference Manual

Search results

Summary of Contents for NonStop SSH 544701-014

Reviews:

Related manuals for NonStop SSH 544701-014

Brands by name

Popular brands