HP NonStop SSH 544701-014, Reference Manual, Page: 227 / 344

HP NonStop SSH Reference Manual STN Reference
•
227
will "round-robin" each new session to spread the workload over the specified CPUs. ANY can be specified for any
available cpu.
PRI priority
Specifies the priority of the started process. Only allowed with the TYPE DYNAMIC parameter. Specifies the process
priority used to start the dynamic application. If omitted, the priority specified by the DYNAMIC^PRI command is used.
Priority can be a number from 0 to 199.
TERM_TYPE TN6530 | ANSI | ANY
TERM_TYPE controls the inclusion of services on STN02 Service menus. The default is ANY.
Workstation terminal emulators are divided into two groups. Those that support HP 6530 telnet extensions and which are
configured for the HP 6530 protocol are considered type TN6530; all others are considered type ANSI. For TN6530
emulators, the STN02 will include only those services with TERM_TYPE TN6530 or ANY. For ANSI (all other)
emulators, the STN02 will include only those services with TERM_TYPE ANSI or ANY.
TERM_TYPE only affects the display formatted for the STN02 Service menu. It does not restrict access to services or
otherwise affect application or terminal activity. For example, an ANSI emulator could request a service configured for
TERM_TYPE TN6530 even though the service name was not displayed on the STN02 service menu.
MODE CONV | BLOCK
Default is CONV. At the beginning of a session, the terminal (client) and the WINDOW are placed into the selected
mode.
MENU HIDDEN | VISIBLE
Default is VISIBLE. Service menus are built using the names of services with MENU VISIBLE. MENU HIDDEN
suppresses the service name on the menu, but the service name can still be entered by the remote user.
This parameter works in conjunction with the ADD LISTENER MENU parameter.
See the command " BANNER ", which can disable menus and other messages.
LIB lib-file-name
Default is no LIB file. For dynamic sessions, this parameter specifies the library object file name for PROG program
object files that require a library.
SWAP $volume-name
Default is no SWAP volume specified. Specifies the swap volume for dynamic sessions.
USER (groupnum,usernum) | groupname.username
USER is only allowed for TYPE DYNAMIC services. If USER is specified, it must match the userid authenticated for
the session, or the session is terminated with an STN71 message. If the SSH userid has SYSTEM-USER not set to
*NONE*, then that is the userid for the session; otherwise the userid and password are prompted from the terminal with
STN15/STN16 messages. Whatever the source for the session userid, it must match the SERVICE USER parameter.
USER is appropriate for applications which do not perform their own logon, or which need to be restricted. For example,
RESILIENT services are often restricted to SUPER.SUPER.
As of STN version B17 (H06.25/J06.14), USER can be specified independent of LOGON REQ. Prior to that, when
USER was specified, LOGON REQ was automatically set. When USER is present and LOGON is REQ, then the session
must be authenticated for the specified userid, either by SSH or by response to the STN15 userid prompt. When USER is
present and LOGON is NONE, the dynamic application will be started under the specified userid without authentication.
Only use LOGON NONE when the application performs its own logon authentication.
PARAM “param-text”
Default is no parameter string. Allows the specification of a parameter string corresponding to the TACL command:
RUN program-file-name / NAME $pname ,... / param-text