HP NonStop SQL/MX Messages Manual Download Page 594

Page: 594 / 752

Utility Messages (20000 through 23099)

HP NonStop SQL/MX Messages Manual — 640324-001

18- 118

SQL 20821

Where

constraint

is the name of the constraint.

Cause. MXTOOL VERIFY found a constraint that is disabled.

Effect. This is an informational message.

Recovery. Contact your service provider to enable the constraint.

SQL 20822

Cause. An inconsistency was found during the VERIFY operation.

Effect. None. This is an informational message.

Recovery. Contact your service provider.

SQL 20850

Where

file-name

is the Guardian file-name of the SQL/MX object.

Where

value

is either a 0 or 1. A 0 indicates the file is not currently audited, and a 1

indicates the file is currently audited.

Cause. The “-a” option was used with the FIXUP utility to change the audit bit on an
SQL/MX file to the currently set value.

Effect. None. This is a warning.

Recovery. No recovery is necessary.

SQL 20852

Where

file-name

is the Guardian file-name of the SQL/MX object.

Where

value

is always 0 to indicate the broken bit is already cleared.

Cause. The ‘-rb” option was used with the FIXUP utility to reset the broken bit on a file
where the broken bit is not currently set.

20821 Constraint

constraint

is disabled.

20822 The DML privileges in the file label do not match the
privileges defined in the metadata.

20850 Audit bit was not changed for file

file-name

. Already

set to the correct value of

value

20852 Broken bit was not changed for file

file-name

. Already

set to the correct value of

value

Summary of Contents for NonStop SQL/MX

















































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NonStop SQL/MX

Reviews:

Brands by name

Popular brands

HP NonStop SQL/MX, Messages Manual

Search results

Summary of Contents for NonStop SQL/MX

Reviews:

Brands by name

Popular brands