manualshive.com logo in svg

HP NonStop SQL/MX, Messages Manual

Share
Download
HP NonStop SQL/MX Messages Manual Download Page 527

Utility Messages (20000 through 23099)

HP NonStop SQL/MX Messages Manual — 640324-001

18 -51

SQL 20197

Where

 index-name 

is the index to be populated as specified by the POPULATE 

INDEX command.

Cause. The index name specified by the caller is not valid. The caller qualifying the 
index name with a catalog or schema is the probable cause. Catalog and schema 
names are not supported.

Effect. The operation fails.

Recovery. Specify a valid name, and resubmit.

SQL 20198

Where

 string 

is the value where the syntax error was detected.

Where

 

int 

is the byte location in the 

string

 where the error occurred.                                                                                                                                                                                                         

Cause. You specified the wrong syntax.

Effect. The operation fails.

Recovery. Correct the syntax and resubmit.

SQL 20199

Cause. An unknown error occurred while populating an index.

Effect. The operation fails.

Recovery. None. Contact your service provider.

SQL 20200

Cause. You specified a catalog name that is not defined or not visible on the system.

Effect. The operation fails.

20197 The specified index 

index-name 

is not available.

20198 A syntax error was found near ‘

string’,

 near character 

position 

int

.

Note. This message is obsolete for users who have applied T1058G10ABO or a 
superseding SPR.

20199 An internal error or exception occurred.

20200 Catalog does not exist.

Summary of Contents for NonStop SQL/MX

















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands