manualshive.com logo in svg

HP NonStop SQL/MX, Messages Manual

Share
Download
HP NonStop SQL/MX Messages Manual Download Page 588

Utility Messages (20000 through 23099)

HP NonStop SQL/MX Messages Manual — 640324-001

18- 112

Where 

mname

 is the partition name defined in the metadata.

Where 

file

 is the file being verified.

Cause. An inconsistency was found between the partition name stored in the resource 
fork and the partition name found in the metadata.

Effect. None. This is an informational message.

Recovery. Contact your service provider.

SQL 20791

Where 

name 

is the name of the table or index.

Cause. VERIFY is comparing the partition map defined in the resource fork with the 
information stored in the metadata. It discovered that the metadata does not contain 
any partition information. Metadata should show at least one entry for the object.

Effect. VERIFY has detected a problem and reported an inconsistency.

Recovery.  Contact your service provider.

SQL 20792

Where 

file name

 is the name of the Guardian file.

Cause. An unexpected error was returned while extracting parts of the ANSI name 
from the resource fork.

Effect. The operation fails.

Recovery. See the Guardian Procedure Errors and Messages Manual topic File- 
System Errors for possible recovery action and resubmit.

SQL 20794 

Where,

number

 is the file-system error number.

file

 is the SQL/MX file being verified.

20791 An internal error occurred - the partition list is 
missing from the metadata for object (

name

).

20792 VERIFY is not able to read file label information for 
Guardian file 

file name

.

20794 Error (

number

) was returned when trying to extract the 

catalog, schema, or table from the ANSI name defined in the 
resource fork for Guardian file (

file

).

Summary of Contents for NonStop SQL/MX

















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands