manualshive.com logo in svg

HP NonStop SQL/MX, Messages Manual

Share
Download
HP NonStop SQL/MX Messages Manual Download Page 457

MXCI Messages (15000 through 15999)

HP NonStop SQL/MX Messages Manual — 640324-001

15 -69

Recovery. Enter a BREAK command or delete the SUBTOTAL command by using 
RESET.

SQL 15522

Cause. A BREAK, SUBTOTAL, or TOTAL command was specified after some rows 
were listed, and then a LIST NEXT command was specified, as in the following 
sequence: SELECT; LIST FIRST n; BREAK ON...;LIST NEXT n. 

Effect. Instead of listing the next n rows, the report is started over from the first row.

Recovery. Informational message only; no corrective action is needed.

SQL 15523

Cause. The value that you specified for the SPACE option was not in the range 0 
through 255.

Effect. The DETAIL command fails.

Recovery. Correct the value of SPACE and resubmit.

SQL 15524

Cause. The value that you specified for the TAB clause was less than the left margin 
or greater than the right margin.

Effect. The DETAIL command fails.

Recovery. Correct the value of TAB and resubmit.

SQL 15525

Cause. The value that you specified for the PAGE, NEED, or SKIP clause was not in 
the range 1 through 32767.

Effect. The DETAIL command fails.

15522 Because of the new report definition command(s), the 
report is being regenerated from the start. 

15523 The value of SPACE is out of range. The valid range is 
0 through 255.

15524 The value of TAB is out of range. The valid range is 
the set of values from left margin to right margin.

15525 The value for PAGE, NEED, or SKIP is out of range. The 
valid range is 1 through 32767.

Summary of Contents for NonStop SQL/MX

















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands