manualshive.com logo in svg

HP NonStop SQL/MX, Messages Manual

Share
Download
HP NonStop SQL/MX Messages Manual Download Page 544

Utility Messages (20000 through 23099)

HP NonStop SQL/MX Messages Manual — 640324-001

18 -68

Cause. The audit attribute of the table could not be turned off during the IMPORT 
operation due to an internal failure. The attribute is turned off when the table is empty 
and contains no indexes. This enables IMPORT to make use of Side Tree inserts for 
better performance. The attribute is turned back on after the IMPORT operation is 
complete.

Effect. The operation fails.

Recovery. See the Guardian Procedure Errors and Messages Manual file system 
errors for possible recovery action and resubmit.

SQL 20270

Where 

name

 is the name of the object where the redefinition timestamp is performed.

Cause. This warning message indicates that not all partitions associated with the 
specified object have had their redefinition timestamps updated.

Effect. The operation completes with warnings.

Recovery. After completing this request, the same request must be issued on all 
systems that contain a partition of the object.

SQL 20271

Where 

error

 is the error returned.

Where 

subsystem

 is the name of the subsystem returning the error.

Cause. An unexpected error was returned while attempting to perform a SPI 
operation.

Effect. The operation fails.

Recovery. None. This is an internal error. Contact your service provider.

SQL 20272

Cause. The DUP operation does not support nonaudited tables.

Effect. The operation fails.

20270 Redefinition timestamp  has been reset for only local 
partitions of 

name 

object. Please execute the command on the 

remote nodes to update respective remote partitions.

20271 SPI Error 

error

 returned from 

subsystem

 while 

performing an online reload operation.

20272 Non-audited tables are not supported. Cannot perform 
DUP.

Summary of Contents for NonStop SQL/MX

















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands