manualshive.com logo in svg

HP NonStop SQL/MX, Messages Manual

Share
Download
HP NonStop SQL/MX Messages Manual Download Page 539

Utility Messages (20000 through 23099)

HP NonStop SQL/MX Messages Manual — 640324-001

18 -63

Recovery. Re-create the Unicode data file. Specify the standard byte order mark 
sequence: 0xFF 0xFE, for the little- endian byte order, and 0xFE 0xFF, for the begin-
endian byte order.

SQL 20245

Where 

column-name

 is the name of the column that corresponds to the invalid 

character set value.

Cause. You specified a literal, with a character set other than ISO8859, for column 

column-name,

 which is part of the partition key.

Effect. The operation fails.

Recovery. Partition key columns must be defined with character set ISO88591.

SQL 20250

Cause. You tried to reuse the first partition, but the new key range that you specified 
(in the WITH clause) overlaps the existing key range of the first partition.

Effect. The operation fails.

Recovery. None.

SQL 20251

Where 

operation

 is the type of MODIFY operation including ADD, MOVE, or DROP.

Cause. This is an internal error.

Effect. The operation fails.

Recovery. None. Contact your service provider.

20245 An invalid character set was specified. Column 

column-

name

 is part of the partitioning key and must be defined with 

the character set ISO88591.

20250 The first partition cannot be reused because the 
specified new key range overlaps the existing key range of 
the first partition.

20251 Request 

operation

 uses the same partition location as 

another request in the command.

Summary of Contents for NonStop SQL/MX

















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands