manualshive.com logo in svg

HP NonStop SQL/MX, Messages Manual

Share
Download
HP NonStop SQL/MX Messages Manual Download Page 444

MXCI Messages (15000 through 15999)

HP NonStop SQL/MX Messages Manual — 640324-001

15 -56

SQL 15410

Where 

source-ds

 is the old data source where the EVARs will be copied from.

Where 

source-ds

 is the existing DS that defines the EVARs to be copied.

Where 

target-ds

 is the new data source where the EVARs will be copied to.

Where 

target-ds

 is the new data source being created.

Cause. A problem occurred in support routines during reading or writing to existing 
EVARs. See the subsequent messages for details of the problem.

Effect. The command fails, removing the partially created new DS.

Recovery. Correct the problem described by the lower-level error messages and enter 
the full command.

SQL 15411

Where 

evar-name

 is name of the EVAR specified in the command.

Where 

evar-type

 is the EVAR type specified in the command.

Cause. Incorrect command entry.

Effect. The operation fails.

Recovery. Check command input for EVAR type, EVAR name, or system. 

SQL 15412

Where 

object-type

 is the object type specified on the command line.

Where 

duplicate-count

 is the number of duplicates found.

Cause. More than one object type for the specified name is found.

Effect. A warning message is displayed, and the command is processed.

Recovery. Delete the duplicates.

15410 Copying EVARs from 

source-ds

 data source to 

target-ds

 

data source failed.

15411 No EVAR named 

evar-name

 found in type 

evar-type

.   

+++SUGG: Perhaps type is wrong, name is spelled wrong, or 
SYSTEM is wrong.

15412 The first 

object-type

 with this name was deleted, but 

duplicate-count

 more duplicates were found.   +++SUG: Run the 

delete command again if more clean-up is needed.

Summary of Contents for NonStop SQL/MX

















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands