manualshive.com logo in svg

HP NonStop SQL/MX, Messages Manual

Share
Download
HP NonStop SQL/MX Messages Manual Download Page 578

Utility Messages (20000 through 23099)

HP NonStop SQL/MX Messages Manual — 640324-001

18- 102

Effect. The operation fails.

Recovery. None. VERIFY does not allow resource fork names to be specified.

SQL 20758

Where 

filename 

is the Guardian file name of the partition that is offline. 

Cause. VERIFY discovered that the table being verified has a partition that is offline. 
This is a partition that is currently part of an active MODIFY request or a failed 
MODIFY request.

Effect. None. This is an informational message.

Recovery. If a MODIFY operation is currently in progress, this error can be ignored. If 
a MODIFY operation is not in progress, the offline partition needs to be recovered. 
Determine which MODIFY operation did not complete, and perform a RECOVER 
operation, and then resubmit.

SQL 20759

Where 

name 

is the index that is not populated. 

Cause. The POPULATE INDEX command has not been run.

Effect. None. This is an informational message.

Recovery. At some point, the POPULATE INDEX command should be performed to 
make the index available for queries.

SQL 20760

Where 

time1

 is the Julian timestamp found on the label.

Where 

time2 

is the Julian timestamp found in the metadata.

Where 

file

 is the name of the Guardian file.

Cause. An inconsistency was found during the VERIFY operation.

Effect. None. This is an informational message.

Recovery. Please use FIXUP to change the redefinition timestamp to correct the 
inconsistency.

20758 Partition 

name 

is offline.

20759 Index 

name

 is offline.

20760 The redefinition timestamp (

time1

) defined on the label 

does not match the time (

time2

) defined in the metadata for 

Guardian file (

file

).

Summary of Contents for NonStop SQL/MX

















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands