manualshive.com logo in svg

HP NonStop SQL/MX, Messages Manual

Share
Download
HP NonStop SQL/MX Messages Manual Download Page 543

Utility Messages (20000 through 23099)

HP NonStop SQL/MX Messages Manual — 640324-001

18 -67

Where 

code2

 is the expected value.

Cause. An unexpected error was returned from SPI when MODIFY attempted to start 
an ORSERV process to perform a FUP RELOAD operation. 

Effect. The operation fails.

Recovery. None. This is an internal error. Contact your service provider.

SQL 20267

Where 

len1

 is the length returned from the SPI request.

Where

 len2

 is the expected length.

Cause. An unexpected error was returned from SPI when MODIFY attempted to start 
an ORSERV process to perform a FUP RELOAD operation.

Effect. The operation fails.

Recovery. None. This is an internal error. Contact your service provider.

SQL 20268

Where 

table-name

 is the name of the target table.

Cause. The audit attribute of the table is turned off during the IMPORT operation if the 
table is empty and contains no indexes. This enables IMPORT to make use of Side 
Tree inserts for better performance. The audit attribute could not be turned back on 
after the IMPORT operation was complete because of an internal failure.

Effect. The IMPORT operation is complete. The table might remain in an unaudited 
state.

Recovery. See the Guardian Procedure Errors and Messages Manual file system 
errors for possible recovery action and resubmit.

SQL 20269

Where

 table-name

 is the name of the target table.

20267 Returned buffer from SPI request has a length of 

len1

, 

expected a value less than or equal to 

len2

.

20268 The audit attribute of table 

table name

 which was 

turned off during import operation could not be turned on.

20269 The audit attribute of table 

table-name

 could not be 

turned off during import operation.

Summary of Contents for NonStop SQL/MX

















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands