manualshive.com logo in svg

HP NonStop SQL/MX, Messages Manual

Share
Download
HP NonStop SQL/MX Messages Manual Download Page 430

MXCI Messages (15000 through 15999)

HP NonStop SQL/MX Messages Manual — 640324-001

15 -42

SQL 15355

Where 

service-name

 is the name of the service.

Cause. The lower-level fails to return the next data source name on the service. The 
system might be busy.

Effect. The operation fails.

Recovery. Use the INFO SERVICE * command to verify that the service exists, then 
retry the failed command.  See the lower-level error messages issued with this 
message.

SQL 15356

Where 

service-name

 is the name of the service.

Where 

count

 is the number of servers scanned on the service.

Cause. The lower level fails to return data from scanning the list of servers or a 
specific server is not found on the service. The number of servers scanned is output. 
The system might be busy.

Effect. The operation fails.

Recovery. Run the INFO SERVICE * command to verify that the service exists, and 
then retry the failed command.  See the lower-level error messages issued with this 
message.

SQL 15357

Where 

server-name

 is the name of the server.

Where 

count

 is the number of servers scanned.

Cause. A specific server is not found. The number of servers scanned is output.

Effect. The operation fails.

Recovery. Check the spelling of the server name and verify that it is a valid name. 
Enter the command with the correct server name. If the error persists, verify that the 
server is operational.

15355 Could not get name of next DS on the SERVICE 

service-

name

.

15356 Failed in scan of SERVERs on the SERVICE 

service-name

 

before finding target name, 

count

 were skipped before 

failure.

15357 SERVER 

server-name

 was not found, looked at 

count

.   

+++SUGG: Perhaps name is not valid or it already terminated.

Summary of Contents for NonStop SQL/MX

















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands