HP NetServer e 800, Service Manual

Page: 11 / 103

Chapter 1 General Information
5
Additional Front Panel Controls and Indicators
Storage devices provide additional controls and indicators, which give control and operational status. See the
following table for Backup Tape drive LED Codes.
Eject
Button
Eject
Button
Backup Tape
Drive (Optional)
Status
LEDs
Activity
LED
Eject
Button
Activity
LED
Flexible Disk Drive
CD-ROM
Storage Devices - Controls and Indicators
Backup Tape Drive LED Codes
Left LED Right LED Definition
Off Off No Power
On Off Cartridge Loaded, but No activity
Flashing* Off Cartridge Loaded and Active
Pulsing** Off Loading/Unloading/Ejecting/Power-On
Off On Self Test Fail
Off Pulsing** No Cartridge, but Caution (cleaning required)
On Pulsing** Cartridge Loaded, but Caution (cleaning required)
Flashing* Pulsing** Cartridge Loaded, Drive Active, Caution (cleaning required)
Pulsing** Pulsing** Cartridge Loading/Unloading, Caution (cleaning required)
* Flashing at 4 Hz rate
** Pulsing at 2 Hz rate
NOTE For more information on the HP Tape Drive and its error codes, refer to the
documentation provided with the tape drive or refer to Hewlett-Packard's web site,
at:
http://www.hp.com/netserver/
The ports and connectors on the NetServer's rear panel are shown in the following illustration.