manualshive.com logo in svg

HP LASERJET ENTERPRISE MFP M725dn, Troubleshooting Manual

The HP LaserJet Enterprise MFP M725dn is a high-performance multifunction printer designed for busy work environments. With its advanced features and robust capabilities, this versatile device ensures professional-quality printing, copying, scanning, and faxing. For convenient troubleshooting assistance, the free Troubleshooting Manual is available for download from manualshive.com.

Share
Download
background image

56.00.YY Error To continue turn off then on

Description

The product experienced a communication error with the optional paper tray.

◦

56.00.01

 (event code): Illegal input, selected paper input tray is unavailable

◦

56.00.02

 (event code): Illegal output, selected paper output bin is unavailable

Recommended action

1.

Turn the product off and then on.

2.

Reseat the optional paper tray.

3.

Check the input connectors for damage. If a connector is damaged, replace the connector.

4.

Remove any third-party hardware.

5.

Upgrade the firmware.

6.

If the error persists, replace the DC controller.

57.00.0X Error

Description

A fan error has occurred.

Recommended action

57.00.01: Fan motor 1 (rear) malfunction

1.

Turn the product off and then on. Listen for fan noise at the rear of the product. If no noise is

heard, replace the power supply fan (FM1).

2.

If this part has been removed or replaced, check the connector (J33) on the DC controller PCA.

57.00.02: Fan motor 2 (front) malfunction

1.

Turn the product off and then on. Listen for fan noise at the front of the product. If no noise is

heard, replace the toner cartridge fan (FM2).

2.

If this part has been removed or replaced, check the connector (J37) on the DC controller.

57.00.03: Fan motor 3 (fuser) malfunction

1.

Turn the product off and then on. Listen for fan noise at the lower back-center of the product. If no

noise is heard, replace the fuser fan (FM3).

2.

If this part has been removed or replaced, check the connector J37 on the DCC.

58.00.02 environmental sensor malfunction

Description

The product has experienced an environmental sensor error.

356

Chapter 2   Solve problems

ENWW

Summary of Contents for LASERJET ENTERPRISE MFP M725dn



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LASERJET ENTERPRISE MFP M725dn

Panasonic FP-7181 Operating Manual preview
FP-7181
Brand: Panasonic Pages: 130
Minolta Di181 Service Manual preview
Di181
Brand: Minolta Pages: 84

Brands by name

Popular brands

Load more brands