manualshive.com logo in svg

HP LASERJET ENTERPRISE MFP M725dn, Troubleshooting Manual

The HP LaserJet Enterprise MFP M725dn is a high-performance multifunction printer designed for busy work environments. With its advanced features and robust capabilities, this versatile device ensures professional-quality printing, copying, scanning, and faxing. For convenient troubleshooting assistance, the free Troubleshooting Manual is available for download from manualshive.com.

Share
Download
background image

4.

Make sure that the registration assembly shutter is properly functioning. Replace the registration

assembly if necessary.

5.

Use the Components tests to activate the pickup motor and the pickup solenoid/clutch (listen for

the motor/solenoid to rotate/move) for the source tray. If the motor or solenoid are not properly

functioning, replace the motor or solenoid.

6.

Use the Manual sensor tests to toggle the TOP sensor (SR9). If the sensor is not properly

functioning, replace the high-voltage power supply.

7.

Inspect the connector (J62) on the DC controller PCA, and connector (J901) on the high-voltage

power supply.

8.

Use the Components tests to activate the drum motor (listen for the motor to rotate). If the motor is

not properly functioning, replace the main drive assembly.

13.B2.FF Jam in top cover area

Description

TOP sensor (SR9) residual jam. This jam occurs when paper exists at any of the paper path jam sensors

when the product power is turned on or after a jam re-evaluation.

Recommended action

1.

Open the top cover, and then remove the toner cartridge.

Remove any jammed paper, and then close the top cover.

2.

Use the Manual sensor tests to toggle the TOP sensor (SR9). If the sensor is not properly

functioning, replace the high-voltage power supply.

3.

Inspect the connector (J62) on the DC controller PCA, and connector (J901) on the high-voltage

power supply.

13.B4.FF Jam in top cover area

Description

Loop sensor (SR6) residual jam. This jam occurs when paper exists at any of the paper path jam

sensors when the product power is turned on or after a jam re-evaluation.

Recommended action

1.

Open the top cover, and then remove the toner cartridge.

Remove any jammed paper, and then close the top cover.

2.

Inspect the connector (J62) on the DC controller PCA, and connector (J901) on the high-voltage

power supply.

3.

Use the Manual sensor tests to toggle the loop sensor (SR6). If the sensor or lever are not properly

functioning, replace the high-voltage power supply.

314

Chapter 2   Solve problems

ENWW

Summary of Contents for LASERJET ENTERPRISE MFP M725dn



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LASERJET ENTERPRISE MFP M725dn

Brands by name

Popular brands

Load more brands