HP j6700, Service Handbook

Page: 62 / 152

62 Chapter 3
Troubleshooting
Identifying LCD-Indicated Conditions
INI C3FF SYS/IO late monarch tst
The monarch CPU is starting the late
(post-memory) monarch-only tests.
FLT C3FF SYS/IO late monarch flt
The late (post-memory) monarch-only
tests failed.
INI C4CC SYS BD initialize ccp
Searching for (lab-only) debugger card.
INI C4CD SYS BD no ccp found
Debugger card not found.
INI C4CE SYS BD ccp disabled
Debugger card disabled.
INI C4CF SYS BD ccp found
Debugger card found.
INI C500 SYS BD get primary path
Autoboot is reading primary boot path
from stable store.
INI C540 EXT IO init pri path
Autoboot is trying to boot from primary
boot device.
INI C580 EXT IO load IPL pri pth
Loading IPL from primary boot device.
WRN C5F0 EXT IO err read pri IPL
Error loading IPL from primary boot
device.
FLT C5F0 EXT IO pri IPL fault
Error loading IPL from primary boot
device.
WRN C5F1 EXT IO err read pri IPL
Cannot load IPL from primary boot
device--load address invalid.
WRN C5F2 EXT IO err read pri IPL
Cannot load IPL from primary boot
device--file is not IPL image.
WRN C5F3 EXT IO err read pri IPL
Cannot load IPL from primary boot
device--IPL image size invalid.
WRN C5F4 EXT IO err read pri IPL
Cannot load IPL from primary boot
device--IPL entry point address invalid.
WRN C5F8 EXT IO err read pri IPL
Cannot load IPL from primary boot
device--IPL image checksum failed.
INI C5FF
<blank>
launch pri IPL
Booting from primary boot path.
INI C642 EXT IO init kybrd consl
Try to initialize USB keyboard.
FLT C642 EXT IO keyboard error
An error was detected trying to access the
keyboard.
WRN C643 EXT IO keyboard reinit
Keyboard was re-initialized.
WRN C64F EXT IO reset montr type
The console device failed to initialize with
the given monitor type. Try again with
type 1.
Table 3-1. Chassis Codes for J6700 Workstations
Ostat Code FRU Message
Description