3.
Remove the hard drive.
To replace the component, see
“Installing a hot-pluggable SAS hard drive” (page 40)
.
Removing and replacing a power supply blank
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To remove the component:
Figure 38 Removing the blank
To replace the component, reverse the removal procedure.
Removing and replacing a hot-swap power supply
The server supports 1+1 redundant power supply for high line (1200W/200~240VAC) and low
line (800W/100~120VAC) in the data center and office-friendly server versions.
Table 42 Power redundancy configurations
Redundancy
DIMM count
Processor count
Power supply count
Line voltage
No
2 to 24
1 or 2
1
High Line (200-240)
Yes
2 to 24
1 or 2
2
High Line (200-240)
No
2 to 12
1 or 2
1
Low Line (100-120)
Yes
2 to 12
1
2
Low Line (100-120)
Yes
2 to 8
1
2
2
Low Line (100-120)
HP Confidential
Removing and replacing a power supply blank 105
