manualshive.com logo in svg

HP HSG80 - StorageWorks RAID Array Controller, Reference Manual, Page: 8 / 266

Share
Download
HP HSG80 - StorageWorks RAID Array Controller Reference Manual Download Page 8

About this Guide

viii

HSG80 Array Controller V8.7 Command Line Interface Reference Guide

•

Product model names and numbers

•

Applicable error messages

•

Operating system type and revision level

•

Detailed, specific questions.

StorageWorks Website

The StorageWorks website has the latest information on this product, as well as the 
latest drivers. Access the StorageWorks website at: 

http://www.compaq.com/storage. 

From this website, select the appropriate product or solution.

StorageWorks Authorized Reseller

For the name of your nearest StorageWorks Authorized Reseller:

•

In the United States, call 1-800-345-1518.

•

In Canada, call 1-800-263-5868.

•

Elsewhere, see the StorageWorks website for locations and telephone numbers.

Summary of Contents for HSG80 - StorageWorks RAID Array Controller











































































































































































































































































Reviews:

No comments