manualshive.com logo in svg

HP HSG80 - StorageWorks RAID Array Controller, Reference Manual, Page: 74 / 266

Share
Download
HP HSG80 - StorageWorks RAID Array Controller Reference Manual Download Page 74

2–58

HSG80 Array Controller V8.7 Command Line Interface Reference Guide

CLI Command Descriptions

Deletes an existing association set.

NOTE:  This command works only in a DRM environment and requires an HSG80 array 
controller with ACS version 8.7P code. Like all DRM commands, use of this command is heavily 
restricted. Refer to the StorageWorks by Compaq Data Replication Manager HSG80 ACS 
Version 8.7P Operations Guide for examples of usage.

Syntax

DELETE association-set-name

Parameters

association-set-name

The name of the association set to be deleted.

Switches

There are no switches associated with this command.

Examples

To delete association set AS4, enter:

DELETE AS4

See Also

ADD ASSOCIATIONS
SET associations

DELETE 

association-set-name

Summary of Contents for HSG80 - StorageWorks RAID Array Controller











































































































































































































































































Reviews:

No comments