manualshive.com logo in svg

HP HSG80 - StorageWorks RAID Array Controller, Reference Manual, Page: 182 / 266

Share
Download
HP HSG80 - StorageWorks RAID Array Controller Reference Manual Download Page 182

2–166

HSG80 Array Controller V8.7 Command Line Interface Reference Guide

CLI Command Descriptions

Displays a list of devices in the failedset.

Syntax

SHOW FAILEDSETS

Parameters

There are no parameters associated with this command.

Switches

There are no switches associated with this command.

Example

BOT> show failedset

Name          Storageset                     Uses             Used by

------------------------------------------------------------------

FAILEDSET     failedset                      DISK10000        

        Switches:

          NOAUTOSPARE

See Also

DELETE FAILEDSET
SET FAILEDSET
SHOW SPARESETS

SHOW FAILEDSETS

Summary of Contents for HSG80 - StorageWorks RAID Array Controller











































































































































































































































































Reviews:

No comments