manualshive.com logo in svg

HP HSG80 - StorageWorks RAID Array Controller, Reference Manual, Page: 207 / 266

Share
Download
HP HSG80 - StorageWorks RAID Array Controller Reference Manual Download Page 207

HSG80 Array Controller V8.7 Command Line Interface Reference Guide

2–191

SITE_FAILOVER

Performs the site failover function in the event the original initiator site is not 
operational.

NOTE:  This command works only in a DRM environment and requires an HSG80 array 
controller with ACS version 8.7P code. Use of this command is heavily restricted. Refer to the 
StorageWorks by Compaq Data Replication Manager HSG80 ACS Version 8.7P Operations 
Guide for an explanation and examples of usage.

The SITE_FAILOVER command changes the role of a target unit to an initiator unit. 
A remote copy set is created with two members:

•

Original target (which is the new initiator)

•

Original initiator (which is the new target)

Syntax

SITE_FAILOVER remote-node-name\remote-copy-set-name

Parameters

remote-node-name\remote-copy-set-name

The remote-node-name part of the parameter specifies the name of the controller 
pair—called a node—receiving the command.

The remote-copy-set-name part of the parameter specifies the name by which the 
remote copy set is known. This name must be unique across the fabric.

NOTE:  Remote copy sets cannot be renamed with the RENAME command. If the wrong name 
is entered, the remote copy set must be deleted and then added again.

The remote-copy-set-name must start with RCS and can consist of a maximum of 
9 characters including letters A through Z, numbers 0 through 9, periods (.), 
dashes (-), or underscores (_).

Switches

There are no switches associated with this command.

Examples

Refer to the StorageWorks by Compaq Data Replication Manager HSG80 ACS 
Version 8.7P Operations Guide.

SITE_FAILOVER

Summary of Contents for HSG80 - StorageWorks RAID Array Controller











































































































































































































































































Reviews:

No comments