HP HPE ProLiant DL365 Gen10 Plus Server User Manual Download

Page: 207 / 223

Power supply specifications

Depending on the installed options and the regional location where the server was purchased, the server can be configured with one of

the following power supplies:

HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply

HPE 800 W Flex Slot Platinum Hot-plug Low Halogen Power Supply

HPE 800 W Flex Slot Titanium Hot-plug Low Halogen Power Supply

HPE 800 W Flex Slot Universal Hot-plug Low Halogen Power Supply

HPE 800 W Flex Slot -48 VDC Hot-plug Low Halogen Power Supply

HPE 1600 W Flex Slot Platinum Hot-plug Low Halogen Power Supply

HPE 1600 W Flex Slot -48 VDC Hot-plug Power Supply

For detailed power supply specifications, see the QuickSpecs on the Hewlett Packard Enterprise

Hewlett Packard Enterprise website

website.

CAUTION:

CAUTION: Mixing different types of power supplies in the same server might:

Limit or disable some power supply features including support for power redundancy.

Cause the system to become unstable and might shut down.

To ensure access to all available features, all power supplies in the same server should have the same output and

efficiency ratings. Verify that all power supplies have the same part number and label color.

Power supply specifications

207

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server
































































































































































































































Search results

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server

Reviews:

Related manuals for HPE ProLiant DL365 Gen10 Plus Server

Brands by name

Popular brands

HP HPE ProLiant DL365 Gen10 Plus Server, User Manual

Search results

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server

Reviews:

Related manuals for HPE ProLiant DL365 Gen10 Plus Server

Brands by name

Popular brands