HP HPE ProLiant DL365 Gen10 Plus Server User Manual Download

Page: 154 / 223

Enabling the Trusted Platform Module as TPM 1.2

Procedure

1. During the server startup sequence, press the F9 key to access System Utilities.

2. From the System Utilities screen select System Configuration > BIOS/Platform Configuration (RBSU) > Server Security > Trusted

Platform Module options.

3. Change the "TPM Mode Switch Operation" to TPM 1.2.

4. Verify that "TPM Visibility" is set to Visible.

5. Press the F10 key to save your selection.

6. When prompted to save the change in System Utilities, do one of the following:

If in graphical mode, click Yes.

If in text mode, press the Y key.

7. Press the ESC key to exit System Utilities.

The server reboots a second time without user input. During this reboot, the TPM setting becomes effective.

8. Enable TPM functionality in the OS, such as Microsoft Windows BitLocker or measured boot.

For more information, see the Microsoft website

Microsoft website.

Enabling the Trusted Platform Module as TPM 1.2

154

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server
































































































































































































































Search results

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server

Reviews:

Related manuals for HPE ProLiant DL365 Gen10 Plus Server

Brands by name

Popular brands

HP HPE ProLiant DL365 Gen10 Plus Server, User Manual

Search results

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server

Reviews:

Related manuals for HPE ProLiant DL365 Gen10 Plus Server

Brands by name

Popular brands