HP HPE ProLiant DL365 Gen10 Plus Server User Manual Download

Page: 42 / 223

Remove the secondary PCI riser cage

Procedure

1. Observe the following alert:

CAUTION:

CAUTION: To prevent damage to the server, power down the server and remove all AC power cords before

removing or installing the PCI riser cage.

2. Back up all server data.

3. Power down the server (Power down the server).

4. Remove all power:

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

5. Do one of the following:

a. Extend the server from the rack ( Extend the server from the rack ).

b. Remove the server from the rack ( Remove the server from the rack ).

6. Remove the access panel ( Remove the access panel).

7. If needed, remove the primary PCI riser cage ( Remove the primary PCI riser cage).

8. Disconnect any cables connected to the PCI riser cage.

9. Remove any expansion boards installed in the PCI riser cage.

10. Remove the PCI riser cage.

Remove the secondary PCI riser cage

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server
































































































































































































































Search results

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server

Reviews:

Related manuals for HPE ProLiant DL365 Gen10 Plus Server

Brands by name

Popular brands

HP HPE ProLiant DL365 Gen10 Plus Server, User Manual

Search results

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server

Reviews:

Related manuals for HPE ProLiant DL365 Gen10 Plus Server

Brands by name

Popular brands