HP HPE ProLiant DL365 Gen10 Plus Server User Manual Download

Page: 188 / 223

Smart Update Manager

SUM is an innovative tool for maintaining and updating the firmware, drivers, and system software of HPE ProLiant, HPE BladeSystem,

HPE Synergy, HPE Superdome Flex servers, and HPE Apollo servers, infrastructure, and associated options.

SUM identifies associated nodes you can update at the same time to avoid interdependency issues.

Key features of SUM include:

Discovery engine that finds installed versions of hardware, firmware, and software on nodes.

SUM deploys updates in the correct order and ensures that all dependencies are met before deploying an update.

Interdependency checking.

Automatic and step-by-step Localhost Guided Update process.

Web browser-based user interface.

Ability to create custom baselines and ISOs.

Support for iLO Repository (Gen10 or later iLO 5 nodes only).

Simultaneous firmware and software deployment for multiple remote nodes.

Local offline firmware deployments with SPP deliverables.

Extensive logging in all modes.

NOTE:

Support for HPE Integrity servers has been discontinued from SUM 8.x.

Smart Update Manager

188

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server
































































































































































































































Search results

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server

Reviews:

Related manuals for HPE ProLiant DL365 Gen10 Plus Server

Brands by name

Popular brands

HP HPE ProLiant DL365 Gen10 Plus Server, User Manual

Search results

Summary of Contents for HPE ProLiant DL365 Gen10 Plus Server

Reviews:

Related manuals for HPE ProLiant DL365 Gen10 Plus Server

Brands by name

Popular brands