HP HP ProCurve series 2500, Management And Configuration Manual

Page: 108 / 392

5-24
Configuring IP Addressing, Interface Access, and System Information
System Information
C
onf
ig
uri
n
g
I
P
Ad
dre
ssi
ng,
In
te
rf
a
ce Acc
e
ss,
an
d
Figure 5-10. System Information Listing After Executing the Preceding Commands
Reconfigure the Age Interval for Learned MAC Addresses. This com-
mand corresponds to the MAC Age Interval in the menu interface, and is
expressed in seconds.
Syntax:
mac-age-time <10 . . 1000000>
(seconds)
For example, to configure the age interval to seven minutes:
HP2512(config)# mac-age-time 420
Configure the Time Zone and Daylight Time Rule. These commands:
■ Set the time zone you want to use
■ Define the daylight time rule for keeping the correct time when daylight-
saving-time shifts occur.
Syntax:
time timezone <1440 . . -1440>
time daylight-time-rule <none | alaska | continental-us-and-canada |
middle-europe-and-portugal | southern-hemisphere | western-europe |
user-defined>
For example, this command configures the time zone and daylight time rule
for Vancouver, British Columbia in Canada (time zone 8 = 480 minutes):
HP2512(config)# time timezone 480 daylight-time-rule
continental-us-and-canada
New hostname,
contact, and
location data from
previous
commands.