HP EliteDesk 800 G2 Desktop Mini Maintenance And Service Manual Download

Page: 144 / 154

If possible, back up all personal files.

Restart the computer, and then insert the Windows 7 operating system DVD into the optical drive before
the Windows operating system loads.

NOTE:

If the computer does not boot to the DVD, restart the computer and press

Esc

as the computer

is powering on to see the startup menu. Use the arrow keys to select the boot menu and press

Enter

. Use

the arrow keys to select the location where the recovery DVD is inserted. Press

Enter

to boot from that

device.

When prompted, press any keyboard key.

Follow the on-screen instructions.

Click Next.

Select Install now.

Follow the on-screen instructions.

After the repair is completed:

Eject the Windows 7 operating system DVD and then insert the Driver Recovery DVD.

Follow the on-screen instructions to install the Hardware Enabling Drivers first, and then install
Recommended Applications.

134 Chapter 10 System backup and recovery

Summary of Contents for EliteDesk 800 G2 Desktop Mini



























































































































































Search results

Summary of Contents for EliteDesk 800 G2 Desktop Mini

Reviews:

Related manuals for EliteDesk 800 G2 Desktop Mini

Brands by name

Popular brands

HP EliteDesk 800 G2 Desktop Mini, Maintenance And Service Manual

Search results

Summary of Contents for EliteDesk 800 G2 Desktop Mini

Reviews:

Related manuals for EliteDesk 800 G2 Desktop Mini

Brands by name

Popular brands