Front bezel security
The front bezel can be locked in place by installing a security screw provided by HP. To install the security
screw:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 18
).
2.
Remove the access panel (
Access panel on page 19
).
3.
If you do not have a 6-32 standard screw, remove one of the four silver 6-32 standard screws located on
top of the drive cage. Refer to
Installing and Removing Drives on page 33
for an illustration of the 6-32
standard screw locations.
4.
Install the 6-32 security screw through the middle front bezel release tab to secure the front bezel in
place.
5.
Replace the computer access panel.
6.
If the computer was on a stand, replace the stand.
7.
Reconnect the power cord and any external devices, and then turn on the computer.
8.
Lock any security devices that were disengaged when the access panel was removed.
20
Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis
Summary of Contents for EliteDesk 800 G2 Desktop Mini
Page 1: ...Maintenance and Service Guide HP EliteDesk 800 G2 SFF Business PC ...
Page 4: ...iv Safety warning notice ...
Page 10: ...x ...
Page 61: ...Hood lock 51 ...
