Processor
Description
Intel Core i7-6700 processor
Intel Core i5-6600 processor
Intel Core i5-6500 processor
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 18
).
2.
Remove the access panel (
Access panel on page 19
).
3.
Rotate the drive cage to its upright position.
4.
Rotate the small baffle into the upright position (
Small baffle on page 48
).
5.
Remove the fan baffle (
Fan baffle on page 49
).
6.
Remove the fan sink (
Fan sink on page 58
).
7.
Rotate the locking lever to its full open position (1).
8.
Raise and rotate the microprocessor retainer to its fully open position (2).
9.
Lift the processor (3) straight up and remove it.
CAUTION:
Do NOT handle the pins in the processor socket. These pins are very fragile and handling
them could cause irreparable damage. Once pins are damaged it may be necessary to replace the
system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to the
processor’s solder connections.
NOTE:
After installing a new processor onto the system board, always update the system ROM to ensure
that the latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the
Web at:
http://www8.hp.com/us/en/support-drivers.html
.
Processor
59
Summary of Contents for EliteDesk 800 G2 Desktop Mini
Page 1: ...Maintenance and Service Guide HP EliteDesk 800 G2 SFF Business PC ...
Page 4: ...iv Safety warning notice ...
Page 10: ...x ...
Page 61: ...Hood lock 51 ...
