Removing a secondary 3.5-inch hard drive
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 18
).
2.
Remove the access panel (
Access panel on page 19
).
3.
Rotate the drive cage to its upright position.
4.
Disconnect the power cable (1) and data cable (2) from the rear of the hard drive. Press the release latch
on the side of the drive cage (3), and then slide the drive out of the drive bay (4).
5.
If you are installing a new drive, refer to
Installing a secondary 3.5-inch hard drive on page 41
. If you
are not installing a new drive, rotate the drive cage down and replace the access panel.
40
Chapter 4 Removal and replacement procedures – small form factor (SFF) chassis
Summary of Contents for EliteDesk 800 G2 Desktop Mini
Page 1: ...Maintenance and Service Guide HP EliteDesk 800 G2 SFF Business PC ...
Page 4: ...iv Safety warning notice ...
Page 10: ...x ...
Page 61: ...Hood lock 51 ...