HP EliteDesk 800 G2 Desktop Mini Maintenance And Service Manual Download

Page: 110 / 154

Diagnostics reports a failure.

Cause

Solution

The cable is not securely connected.

Ensure that the cable is securely attached to the network
connector and that the other end of the cable is securely attached
to the correct device.

The cable is attached to the incorrect connector.

Ensure that the cable is attached to the correct connector.

There is a problem with the cable or a device at the other end of
the cable.

Ensure that the cable and device at the other end are operating
correctly.

The network controller is defective.

Contact an authorized service provider.

Diagnostics passes, but the computer does not communicate with the network.

Cause

Solution

Network drivers are not loaded, or driver parameters do not
match current configuration.

Make sure the network drivers are loaded and that the driver
parameters match the configuration of the network controller.

Make sure the correct network client and protocol is installed.

The network controller is not configured for this computer.

Select the Network and Sharing Center icon in the Control Panel
and configure the network controller.

To access Control Panel in Windows 7, click Start, and then select
Control Panel.

To access Control Panel in Windows 8.1, from the Start screen,
type

, and then select Control Panel.

To access Control Panel in Windows 10, type

control panel

the taskbar search box, and then select Control Panel from the
list of applications.

Network controller stopped working when an expansion board was added to the computer.

Cause

Solution

The network controller requires drivers.

Verify that the drivers were not accidentally deleted when the
drivers for a new expansion board were installed.

Network controller stops working without apparent cause.

Cause

Solution

The files containing the network drivers are corrupted.

Reinstall the network drivers using the Recovery Disc Set in
Windows 7 or Windows recovery tools in Windows 8.1.

If necessary, download the softpaq from the web (from a different

computer).

The cable is not securely connected.

Ensure that the cable is securely attached to the network
connector and that the other end of the cable is securely attached
to the correct device.

The network controller is defective.

Contact an authorized service provider.

100 Chapter 6 Troubleshooting without diagnostics

Summary of Contents for EliteDesk 800 G2 Desktop Mini



























































































































































Search results

Summary of Contents for EliteDesk 800 G2 Desktop Mini

Reviews:

Related manuals for EliteDesk 800 G2 Desktop Mini

Brands by name

Popular brands

HP EliteDesk 800 G2 Desktop Mini, Maintenance And Service Manual

Search results

Summary of Contents for EliteDesk 800 G2 Desktop Mini

Reviews:

Related manuals for EliteDesk 800 G2 Desktop Mini

Brands by name

Popular brands