b.
Insert the new battery and position the clip back into place.
Figure B-3
Removing a Coin Cell Battery (Type 3)
NOTE:
After the battery has been replaced, use the following steps to complete this procedure.
9.
Replace the access panel.
10.
If the computer was on a stand, replace the stand.
11.
Plug in the computer and turn on power to the computer.
12.
Reset the date and time, your passwords, and any special system setups using Computer Setup.
Refer to the
Computer Setup (F10) Utility Guide
.
13.
Lock any security devices that were disengaged when the access panel was removed.
ENWW
51
Summary of Contents for Compaq dc5800
