Removing Bezel Blanks
On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that
need to be removed before installing a drive. To remove a bezel blank:
1.
Remove the front bezel.
2.
To remove the 3.5-inch bezel blank, push the two retaining tabs that hold the bezel blank in place
towards the outer right edge of the bezel (1) and slide the bezel blank to the right to remove it (2).
Figure 2-4
Removing a 3.5-inch Bezel Blank
3.
To remove the 5.25-inch bezel blank, push the two retaining tabs that hold the bezel blank in place
towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2).
Figure 2-5
Removing a 5.25-inch Bezel Blank
4.
Replace the front bezel.
ENWW
Removing Bezel Blanks
13
Summary of Contents for Compaq dc5800
