Removing or Installing an Expansion Card
The computer has one standard low-profile PCI expansion slot that can accommodate an expansion
card up to 17.46 cm (6.875 inches) in length. The computer also has two PCI Express x1 expansion
slots and one PCI Express x16 expansion slot.
NOTE:
The PCI and PCI Express slots support only low profile cards.
Figure 2-11
Expansion Slot Locations
Table 2-2
Expansion Slot Locations
Item
Description
1
PCI Express x16 expansion slot
2
PCI expansion slot
3
PCI Express x1 expansion slot
4
PCI Express x1 expansion slot
NOTE:
You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16
expansion slot.
To install an expansion card:
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as diskettes or compact discs, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the system board as
long as the system is plugged into an active AC outlet. You must disconnect the power cord to
avoid damage to the internal components of the computer.
ENWW
Removing or Installing an Expansion Card
21
Summary of Contents for Compaq dc5800
