CAUTION:
Use caution when choosing Loop mode because it makes it possible to overwrite
data on previously written cartridges.
Automatic mode
: In Automatic mode, the device switches from Sequential mode into Random mode
when it receives certain SCSI commands. Automatic mode is the default setting.
To set a behavior mode:
1.
From the Home screen, press
Previous
or
Next
until the screen displays
Configuration
. Press
Enter
to select.
2.
Press
Previous
or
Next
until the screen displays
Autoloader Behavior
. Press
Enter
to select.
3.
Enter the administrator password if prompted.
4.
Press
Previous
or
Next
until the screen displays
Autoloader Mode
. Press
Enter
.
5.
The screen displays
Set Autoloader Mode
, followed by the current Autoloader mode:
Automatic
,
Sequential
, or
Random
. To change the mode, press
Enter
.
6.
Press
Previous
or
Next
to scroll through the screens for
Automatic
,
Sequential
, or
Random
.
Press
Enter
to select the Autoloader mode.
7.
If you enabled Sequential mode, you can configure the Autoload and Loop options:
a.
Press
Previous
or
Next
until the screen displays
Autoload Mode Disable
or
Autoload Mode
Enable
. To change the Autoload mode, press
Enter
. The screen displays either
Disable
Autoload Mode
or
Enable Autoload Mode.
Press
Previous
or
Next
to toggle between the
enabled and disabled screens. Press
Enter
to select the Autoload mode. The display shows
the new Autoload mode.
b.
Press
Previous
or
Next
until the screen displays either
Loop Mode Disable
or
Loop Mode
Enable
. To change loop mode, press
Enter.
The screen displays either
Enable Loop Mode
or
Disable Loop Mode.
Press
Previous
or
Next
to toggle between the enabled and disabled
screens. Press
Enter
to select the loop mode.
Setting the date and time (Configuration > Autoloader Date/Time)
NOTE:
When setting the hours, the time is based on a 24-hour clock. There is no a.m. or p.m.
designation.
Use
Set Date and Time
to set the date and time used to record events. Access to this feature requires
the administrator password.
To set the date:
1.
From the Home screen, press
Previous
or
Next
until the screen displays
Configuration
. Press
Enter
to select.
2.
Press
Previous
or
Next
until the screen displays
Autoloader Date/Time
. Press
Enter
to select.
3.
Enter the administrator password if prompted.
4.
The screen displays
Set Yr/Month/Day 2006 / 07 / 21
with a flashing number. Press
Previous
or
Next
to change the value of the flashing number. Press
Enter
to accept the value of the
flashing number and move to the next number.
5.
Repeat Step 5 until all numbers in the date are correct. Press
Enter
.
6.
The screen displays (example)
Set Hour / Mins 16 : 52
with the first number flashing. Press
Previous
or
Next
until the flashing number reads correctly. Press
Enter
to move to the next
number. Repeat this step until all numbers in the time are correct. Press
Enter
.
Configuring network settings (Configuration > Configure Network Settings)
The device can automatically obtain an IP address from a DHCP server when the device is powered
on. The device also supports user-specified fixed addresses through the front panel.
The device also supports SNMP. You can enable SNMP and configure the target addresses with
the RMI. See
Changing the network configuration (page 50)
Operator control panel (OCP)
75
Summary of Contents for BL536A
Page 149: ...German laser notice Italian laser notice Japanese laser notice Laser compliance notices 149 ...
Page 151: ...Danish notice Dutch notice Estonian notice Finnish notice French notice Recycling notices 151 ...
Page 155: ...French battery notice German battery notice Battery replacement notices 155 ...
Page 156: ...Italian battery notice Japanese battery notice 156 Regulatory compliance and safety ...