HP BL536A, User'S & Service Manual

Page: 41 / 165

•
Autoloader LUN Hosted by Drive — Yes, if this drive is hosting the Autoloader at LUN 1. Will
always be Yes for the 1/8 G2 Tape Autoloader.
•
Data Compression — Yes, if the host has hardware compression turned on for the drive.
•
Interface Type — SCSI, Fibre Channel, or SAS
•
WWide Node Name (FC drive only) — world wide unique number for the drive. The
Autoloader assigns WWNames to the drive bays. When a tape drive is replaced, the
WWName is re-assigned to the replacement drive.
•
Port information (FC drive only)
WWide Port Name — world wide unique identifier for the port. The WW Node and
Port Name will be slightly different.
◦
◦
Port Type — the current setting of the drive port. Direct connected devices are typically
Loop. Devices connected to a switch are typically Fabric.
◦
Speed
Viewing network information
The Identity: Network page displays information about the network configuration.
Figure 30 Identity: Network page
You can see, but not modify:
•
MAC Address — a unique identifier for the autoloader controller network interface
•
Full Qualified Domain Name — the fully qualified domain name for the device
•
Clock Synchronization Configuration (SNTP) — When Enabled, the device will obtain the
current time and date from the configured SNTP server.
When IPv4 Addressing is Enabled, you can see, but not modify:
Remote management interface (RMI) 41