Figure 36 Status: Inventory: Media details pane
In the media details pane,
•
Slot # — lists “Mailslot” or the index number of each slot in the magazine from lowest to
highest.
•
Attn — indicates an attention state for storage slots or provides information on the mailslot
state.
•
Status — Full or Empty.
•
In Drive — shows when the tape from this slot is in a drive.
•
Label — the bar code label data for the tape in the slot.
•
Media Loads — the number of times this tape has been loaded into a drive in its lifetime. This
field may be blank if the tape has not been loaded into a drive in this device or if the inventory
has changed.
•
Comment — any additional information about the tape in the slot (for example, Clean Tape
if the cartridge is a cleaning tape).
Configuration
Changing the system configuration
Use the
Configuration: System page (page 47)
to modify the system configuration.
System configuration changes are only applied after the
Apply Selections
or the
Submit
button is
selected. After making the selection, a warning page informs you of the impact of the proposed
change. In some cases a pop-up screen asks you to confirm the change. Many changes also require
the device to reboot. You may need to click
Refresh
to see the changes.
46
Operating the Tape Autoloader
Summary of Contents for BL536A
Page 149: ...German laser notice Italian laser notice Japanese laser notice Laser compliance notices 149 ...
Page 151: ...Danish notice Dutch notice Estonian notice Finnish notice French notice Recycling notices 151 ...
Page 155: ...French battery notice German battery notice Battery replacement notices 155 ...
Page 156: ...Italian battery notice Japanese battery notice 156 Regulatory compliance and safety ...
