Figure 1-30
RJ-45 connector
LC connector
Optical fiber connectors are indispensable passive components in optical fiber communication
system. Their application enables the removable connection between optical channels, which
makes the optical system debugging and maintenance
dispatching of the system more flexible.
Some optical fiber connector types are as follows:
LC: square optical fiber connector of the push
SC: standard optical fiber connector
FC: round optical fiber connector with screw thread
ST: round plug-in optical fiber connector
MT-RJ: square transceiver optical fiber connector
Currently, the HP SR6600 routers support only the LC
Figure 1-31
LC connector
Before connecting a fiber, make sure that the received optical power at the local end does not
exceed the upper threshold of the optical receive power of the optical module. Otherwise, the
optical module may be damaged.
Cable connecting a 1000 Mbps electrical Ethernet interface
Usually, you can use a category
interface.
Figure 1-32
shows an Ethernet cable.
Figure 1-32
Ethernet cable
Ethernet cables fall into the following two categories:
Standard cable: Also called straight
crimped in the RJ-45 connectors in the same sequence. a straight
connect a terminal (for example, PC or router) to a hub or L
with the router are straight-through cables.
Optical fiber connectors are indispensable passive components in optical fiber communication
system. Their application enables the removable connection between optical channels, which
makes the optical system debugging and maintenance more convenient and the transit
dispatching of the system more flexible.
Some optical fiber connector types are as follows:
LC: square optical fiber connector of the push-pull snap-in type
SC: standard optical fiber connector
FC: round optical fiber connector with screw thread
in optical fiber connector
RJ: square transceiver optical fiber connector
SR6600 routers support only the LC-type connectors.
Before connecting a fiber, make sure that the received optical power at the local end does not
exceed the upper threshold of the optical receive power of the optical module. Otherwise, the
optical module may be damaged.
1000 Mbps electrical Ethernet interface
Usually, you can use a category-5 twisted pair cable to connect a 1000 Mbps electrical Ethernet
shows an Ethernet cable.
Ethernet cables fall into the following two categories:
Standard cable: Also called straight-through cable. At both ends of a standard cable, wires are
45 connectors in the same sequence. a straight-through cable is used to
connect a terminal (for example, PC or router) to a hub or LAN Switch. The cables delivered
through cables.
Optical fiber connectors are indispensable passive components in optical fiber communication
system. Their application enables the removable connection between optical channels, which
more convenient and the transit
Before connecting a fiber, make sure that the received optical power at the local end does not
exceed the upper threshold of the optical receive power of the optical module. Otherwise, the
5 twisted pair cable to connect a 1000 Mbps electrical Ethernet
through cable. At both ends of a standard cable, wires are
through cable is used to
AN Switch. The cables delivered
