The numbers 1 to 2 in
Figure 1-25
represent Slot 1 and Slot 2 respectively.
You can insert a MIM only at the bottom of an interface module slot of FIP-200 because only
the bottom of the slot has a connector.
Maximum interface modules provided by FIP-200s in full configuration
Table 1-25
Maximum interface modules provided by FIP-200s in full configuration
Interface
module
One RPE-X1
Two RPE-X1s
One RSE-X1
Two RSE-X1s
A6604
A6608
A6604
A6608
A6604
A6608
A6604
A6608
FIP-200
2
4
2
4
Not supported
MIMs
4
8
4
8
—
HIMs
4
8
4
8
—
FIP-210
Introduction
The FIP-210 provides a high-speed service processing capability. The FIP-210 supports
SR6600 HIMs and MIMs, and provides two Combo interfaces. In consideration of smooth
upgrade requirements, the FIP-210 supports two HIMs or two MIMs, or intermixing of a HIM and
a MIM.
Figure 1-26
Front view of the FIP-210
(1) Slot 1
(2) Slot 2
(3) OPEN BOOK sign
(4) Combo interface 1
(5) Combo interface 0
"OPEN BOOK" sign – Refer to related sections when performing the following operations:
Operation
Reference
Plug/unplug an FIP-210
“Installing and Removing an FIP” in Chapter 4 “Installing the Router”
Plug/unplug an MIM
“Installing and Removing a MIM” in Chapter 4 “Installing the Router”
Connect an Ethernet cable
“Connecting the Management Ethernet Interface” and “Connecting Ethernet
Cables” in Chapter 4 “Installing the Router”
Connect an optical fiber
“Connecting an optical Ethernet interface” in Chapter 4 “Installing the Router”
