Figure 1-29
Combo interfaces on a FIP-100
(1) 1000 Mbps optical Ethernet interface (SFP1)
(2) 10/100/1000 Mbps electrical Ethernet interface (GE0) LED
(3) 10/100/1000 Mbps electrical Ethernet interface (GE1)
(4) 10/100/1000 Mbps electrical Ethernet interface (GE1) LED
(5) 10/100/1000 Mbps electrical Ethernet interface (GE0)
(6) 1000 Mbps optical Ethernet interface (SFP0)
(7) 1000 Mbps optical Ethernet interface (SFP0) LED
(8) 1000 Mbps optical Ethernet interface (SFP1) LED
(9) Run LED (RUN)
For a Combo interface, you can use either the electrical Ethernet interface or the optical
Ethernet interface. You can use the
combo enable
{
copper
|
fiber
} command in interface
view to switch between the optical and electrical Ethernet interfaces. For details about the
combo enable
{
copper
|
fiber
} command, refer to
Ethernet Interfaces
in the
Access Volume
of
HP SR6600 Routers User Manual
.
Technical specifications for Combo interfaces
Technical specifications for electrical Ethernet interfaces
Table 1-30
Technical specifications for electrical Ethernet interfaces
Item
Specification
Connector
RJ-45
Interface type
Automatic MDI/MDI-X
Frame format
Ethernet_II
Ethernet_SNAP
Rate and duplex mode
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
Interface cable and maximum transmission distance
Twisted pair with a maximum transmission distance
of 100 m (328.08 ft.)
