HP 8710w - HP Mobile Workstation Maintenance And Service Manual Download Page 26

Page: 26 / 175

Rear component

Component

Function

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is
normal for the internal fan to cycle on and off during
routine operation.

Right-side components

Item

Component

Function

(1)

Audio-out (headphone) jack

Produces sound when connected to optional powered
stereo speakers, headphones, ear buds, a headset, or
television audio.

(2)

Audio-in (microphone) jack

Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.

(3)

USB ports (4)

Connects up to 4 optional USB devices.

(4)

Optical drive

Reads an optical disc.

(5)

Optical drive button

Releases the media tray.

(6)

RJ-11 (modem) jack

Connects a modem cable.

(7)

RJ-45 (network) jack

Connects a network cable.

Chapter 2 External component identification

Summary of Contents for 8710w - HP Mobile Workstation
















































































































































































Search results

Summary of Contents for 8710w - HP Mobile Workstation

Reviews:

Related manuals for 8710w - HP Mobile Workstation

Brands by name

Popular brands

HP 8710w - HP Mobile Workstation, Maintenance And Service Manual

Search results

Summary of Contents for 8710w - HP Mobile Workstation

Reviews:

Related manuals for 8710w - HP Mobile Workstation

Brands by name

Popular brands