HP 8710w - HP Mobile Workstation, Maintenance And Service Manual

Page: 75 / 175

Expansion memory module
Description Spare part number
4096-MB (PC2-5300, 667-MHz, DDR2) 469650-001
2048-MB (PC2-5300, 667-MHz, DDR2) 450576-001
1024-MB (PC2-5300, 667-MHz, DDR2) 450575-001
512-MB (PC2-5300, 667-MHz, DDR2) 450577-001
Before removing the expansion memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 46 ).
5. Remove the keyboard (see Keyboard on page 62 ).
Remove the expansion memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the
memory module slot.
Reverse this procedure to install the expansion memory module.
Component replacement procedures 65