HP 8710w - HP Mobile Workstation Maintenance And Service Manual Download Page 155

Page: 155 / 175

Initiating a recovery in Windows

To initiate a recovery in Windows, follow these steps:

Back up all personal files.

Select

Start > All Programs > HP Backup & Recovery > HP Backup and Recovery

Manager

Click

Next

Click

Recover important files or the entire system

, and then click

Next

Follow the on-screen instructions.

Initiating a recovery from the hard drive recovery partition

To initiate a recovery from the hard drive recovery partition, follow these steps:

Back up all personal files.

Restart the computer, and then press

f11

before the Windows operating system loads.

Click a recovery option, and then click

Next

Follow the on-screen instructions.

Backup and recovery using Windows XP 145

Summary of Contents for 8710w - HP Mobile Workstation
















































































































































































Search results

Summary of Contents for 8710w - HP Mobile Workstation

Reviews:

Related manuals for 8710w - HP Mobile Workstation

Brands by name

Popular brands

HP 8710w - HP Mobile Workstation, Maintenance And Service Manual

Search results

Summary of Contents for 8710w - HP Mobile Workstation

Reviews:

Related manuals for 8710w - HP Mobile Workstation

Brands by name

Popular brands