8.
Fan/heat sink assembly (see
Fan/heat sink assembly on page 72
)
9.
Graphics card (see
Graphics card on page 74
)
10.
Processor heat sink (see
Heat sink on page 76
)
11.
Display assembly (see
Display assembly on page 79
)
12.
Top cover (see
Top cover on page 85
)
13.
Speaker assembly (see
Speaker assembly on page 87
)
14.
System board (see
System board on page 89
)
Remove the PC Card assembly:
1.
Turn the system board upside down, with the PC Card eject button toward you.
2.
Remove the four Phillips PM2.0×4.0 screws that secure the PC Card assembly to the system
board.
3.
Remove the PC Card assembly from the system board.
Reverse this procedure to install the PC Card assembly.
Component replacement procedures
95
Summary of Contents for 8710w - HP Mobile Workstation
