HP 85640A, Operating And Service Manual

Page: 25 / 169

Initial Inspection
Is the Shipment Complete?
Figure 1-1 shows the parts and accessories that are shipped with your HP 85640A RF tracking
generator . If any part or accessory is missing, contact your sales representative .
Is the Shipping Container in Good Condition?
Inspect the shipping container . If the container or cushioning material is damaged, verify that
the contents are complete and that the analyzer functions correctly , both mechanically and
electrically .
If the contents are incomplete or if the HP 85640A fails the verication tests in Chapter 4,
notify any Hewlett-P ackard sales and service oce (see T able 2-3). The HP sales and service
oce will arrange for repair or replacement without waiting for a claim settlement.
Save all packaging materials; show any damages to the container or cushioning materials to the
carrier .
Save the P ackaging Materials
The shipping container and cushioning materials are shown in Figure 7-2. Save these materials ,
to use when you ship your instrument, or return it for service or repair . If the original
materials are not available , you may order replacements from any HP sales and service oce
(see T able 2-3).
Instructions for repackaging the HP 85640A are in \Returning the RF Tracking Generator for
Service" in Chapter 7.
Preparing the RF Tracking Generator for Use
The RF tracking generator must be properly connected to one of the compatible portable
spectrum analyzers listed in T able 2-1 . Y ou also need to connect it to an ac power source . If
you want to install your tracking generator in an HP System II cabinet or a standard 19 inch
(486.2 mm) equipment rack, complete instructions are provided with the Option 908 and Option
909 rack mounting kits .
Caution
Before you connect your tracking generator to an ac power source , make sure
that the line voltage is correct, the line-voltage selector switch located on
the tracking generator rear panel is set to the correct voltage (refer to the
following paragraphs), and the proper fuse is installed. Y ou can damage the
instrument if you connect it to the wrong voltage .
2-2 Installation HP 85640A RF T racking Generator Operation and Service Manual